Program keybox

Change the settings for an iBox BT LE, iBox BT,or iBox.

The settings include:

Beginning and ending timed access hours
Activate or deactivate timed access hours
Shackle code
Call before showing (CBS) code
Call before showing activation / deactivation
Program an iBox BT or iBox with business card, listing ID, or listing date information

When using Client version 1.0.4 and above

The programming base is automatically detected and used, there is no setup required.

When using Client version 1.0.3

You must use the Device Manager feature in your computer to set the programming base to use COM1 or COM2 communication ports. Then in SupraNET, when redirected to the COM Port Setup page, use the drop-down menu to choose the same COM port you chose in theDevice Manager. If you log out and log back in, you must set up the COM Ports again.

Program a keybox

Click Program Key/Keybox from Common Tasks on the SupraNET homepage.
From the Key or Keybox: Program/Deprogram/Diagnose screen, verify Program is selected from the Task section.
From Product Type, select the type of keybox to program, from the following:

iBox BT (iBox BT LE)
iBox

Connect the keybox to the programming base.

iBox BT and iBox. To connect an iBox to the programming base, place the iBox with the infrared lens down and align it with the lens on the programming base.

CAUTION: Never remove a keybox from the programming base when the box light is on.

Click Continue.
From the Keybox: Program screen, make the necessary changes to the keybox programming information.
Click Continue.

The system displays a completion message and prompts to select the next task.